Concrete Slab Finishing Tools
WALKING TROWEL
| Tool | Length | Features |
| 444 | 440 | Round Ends |
| 555 | 600 | Round Ends |
| 556 | 600 | 1 Square End |
| Stainless Steel |
||
| 557 | 600 | Round Ends |
| 558 | 600 | 1 Square End |
Trowel concrete floors from a standing position. The tubular connection pivots freely to allow the changing angle between the blade and handle to occur.
The square end blade allows trowelling up against a wall. Used in conjunction with telescopic handle 1076 or clip handle 588
FRESNO TROWELS
TOOL: 606 - 600mm Blade The illustration shows the standard fitting which can be locked at the desired angle. With this fitting the Fresno may also be used as a walking trowel by locking the fitting parallel to the blade.
TOOL: 607 - 600mm Blade
The Fresno may be fitted with a bracket and tilt mechanism as illustrated - used only in a push/pull operation.
TOOL: 609 - 900mm Blade
A larger version of Tool No. 607.
ALUMINIUM BULLFLOAT
| Tool | Length (mm) |
| 1063 | 900 |
| 1064 | 1200 |
| 1065 | 1500 |
| 1068 | 1800 |
Features:
· Long wearing aluminium alloy blade
· Low maintenance
· Radius on blade corners reduces end marking
· Gives concrete a smoother wet finish
· Makes final finish easier
BLADE OPERATION: The tilt of the blade is adjustable and controlled by twisting the handle. This enables the operator to change the tilt of the blade (continuously if required) to achieve the optimum finish to the concrete. If the blade lies flat on the slab it leaves a rough finish but will close and fill holes. When the blade is tilted on an angle, a smoother finish will result. There is no need to raise or lower the handle, simply twist it for best results.
LIGHTWEIGHT FINISHING BROOMS
| Tool | Length (mm) |
| 1572 | 600 |
| 1573 | 750 |
| 1574 | 900 |
HAIR AND FIBRE BRISTLE TIMBER STOCK (Tool: 1574)
The brooms use a quality hair and fibre bristle.
| Tool | Length (mm) |
| 1974 | 900 |
Fitted with 360 degree adjustable bracket (Reg Design No. 123595. Replacement brush Tool No1904.
