Yallah: 02 4257 2611
Bomaderry: 02 4423 5111
Batemans Bay: 02 4472 4944

NATION WIDE DELIVERY

Concrete Slab Finishing Tools

Finish your concrete slab with these tools from SCDCS.

WALKING TROWELS

Trowel concrete floors from a standing position.

Walking Trowels for finishing concrete slabThe tubular connection pivots freely, to allow the changing angle between the blade and handle to occur.

The square end blade allows trowelling up against a wall. Used in conjunction with telescopic handle 1076 or clip handle 588.

Tool
Length
Features
444
440
Round
Ends
555
600
Round
Ends
556
600
1 Square
End
Stainless Steel
557
600
Round
Ends
558
600
1 Square
End

FRESNO TROWELS

Fresno trowel for finishing concrete slabTOOL 606: 600mm Blade
The illustration shows the standard fitting which can be locked at the desired angle. With this fitting the Fresno may also be used as a walking trowel by locking the fitting parallel to the blade.

TOOL 607: 600mm Blade
The Fresno may be fitted with a bracket and tilt mechanism as illustrated - used only in a push/pull operation.

TOOL: 609: 900mm Blade
A larger version of Tool No. 607.


ALUMINIUM BULLFLOATS

Bull Float for finishing concrete slabFeatures of aluminium bullfloats:

  • Long wearing aluminium alloy blade
  • Low maintenance
  • Radius on blade corners reduces end marking
  • Give concrete a smoother wet finish
  • Make final finish easier.

Blade operation: The tilt of the blade is adjustable and is controlled by twisting the handle. This enables the operator to change the tilt of the blade (continuously if required), to achieve the optimum finish to the concrete.

If the blade lies flat on the slab, it leaves a rough finish but will close and fill holes. When the blade is tilted on an angle, a smoother finish will result. There is no need to raise or lower the handle, simply twist it for best results.

Tool
Length
(mm)
1063
900
1064
1200
1065
1500
1068
1800

LIGHTWEIGHT FINISHING BROOMS

HAIR AND FIBRE BRISTLE BROOM, TIMBER STOCK (Tool 1574)
These brooms use a quality hair and fibre bristle.Finishing Brooms for concrete slabs

NYLON BRISTLE BROOM, ALUMINIUM STOCK (Tool 1974)
Fitted with 360 degree adjustable bracket (Reg Design No. 123595).
Replacement brush: Tool No 1904.

Tool
Length (mm)
Timber Stock
1572
600
1573
750
1574
900
Aluminium Stock
1974
900
Useful Links

YALLAH  [map]

70 Princes Highway
Yallah 2530
Ph: 4257 2611
Fax: 4257 2599

Yallah Supply Centre

BOMADERRY  [map]

1 McIntyre Way
Bomaderry 2541
Ph: 4423 5111
Fax: 4423 5105

Bomaderry Supply Centre

BATEMANS BAY  [map]

1 Russell Lane
Batemans Bay 2536
Ph: 4472 4944
Fax: 4472 4922

Batemans Bay Supply Centre

SOLUTIONS FOR BETTER LOOKING CONCRETE

© 2016 SCDCS